Lofra MUSD48MMG700, Manual

Page: 42 / 56

42
To increase the distance between the front edge of the hob
and the burners it is possible to install the front protection
supplied with the appliance.
For installation, see Fig. A and the supplied screws.
GAS CONNECTION
The supply line should be equipped with an approved shutoff valve. This valve should be
located in the same room as the range and should be in a location that allows ease of
opening and closing.
Do not block access to the shutoff valve. The valve is for turning on or shutting off gas to the
appliance.
Open the gas shutoff valve in the gas supply line. Wait a few minutes for gas to move through
the gas line.
The gas supply between the shutoff valve and the regulator may be connected by
A.G.A./C.G.A.-approved flexible metallic union- connected piping where local codes permit
use.
WARNING:
Explosion Hazard

Use a new CSA or UL approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to Propane, have a qualified person make
sure gas pressure does not exceed 14” water column.

Examples of a qualified person include licensed heating
per- sonnel, authorized gas company personnel, and
authorized service personnel.

Failure to do so can result in death, explosion, or fire.
WARNING:
You must use stability anti tip bracket to prevent unit from
tipping.