Lofra MUSD48MMG700, Manual

Page: 37 / 56

37
3. Taking care to not damage the countertop, slide range into cut-out opening and double
check for levelness.
MODEL AND SERIAL NUMBER LOCATION
The serial plate is located on the oven front frame behind the oven door or on the drawer
side frame.
When ordering parts for or making inquiries about your range, always be sure to include the
model and serial numbers and a lot number or letter from the serial plate on your range.
Your serial plate also tells you the rating of the burners, the type of fuel and the pressure the
range was adjusted for when it left the factory.
BEFORE YOU CALL FOR SERVICE
Read the Avoid Service Checklist and operating instructions in your Use and Care Guide. It
may save you time and expense. The list includes common occurrences that are not the
result of defective workmanship or materials in this appliance.
Refer to the warranty and service information in your Use and Care Guide for phone number
and address.
Please call or write if you have inquiries about your range product and/or need to order
parts.
REMOVAL AND RE-INSTALLATION
Removing the Range for Service
1. Turn the gas supply valve to the off position.
2. Turn off power to the range at the circuit breaker panel or fuse box.
3. Pull the range out from the wall.
WARNING:
To prevent flare-ups and avoid creation of harmful by-products, do
not use the cooktop without all burner caps properly installed to
insure proper ignition and gas flame size.
Always keep the burner caps and burner heads in place whenever
the surface burners are on use. Do not allow spills, food, cleaning
agents or any other material to enter the gas orifice holder
openings.