Lofra MUSD48MMG700, Manual

Page: 25 / 56

25
PROVIDE ADEQUATE GAS SUPPLY
Be certain that the appliance being installed is correct for the gas service provided (natural
gas).
The pressure regulator located at the inlet of the cooktop manifold must remain in the supply
line regardless of whether natural or Propane gas is being used.
NOTE:

The range top has its own regulator. Use only the provided regulator, which must be
installed in the gas line that runs from the cooktop gas inlet to the gas shut-off valve.

For a new product, never install used connectors, which can leak gas and cause
personal injury. Use only new, flexible connectors.
ELECTRICAL REQUIREMENTS

It is the owner’s responsibility to make sure that the electrical service meets electrical
requirements and that the electrical outlet has been properly installed by a licensed
electrician.

Do not use an extension cord or adapter plug with this range.
 This range must be properly grounded.

Wiring diagram is located on the back of the range. (Inside of the cover back wire)
 A dedicated circuit breaker is recommended.