Lofra MUSD48MMG700, Manual

Page: 32 / 56

32
INSTALLATION INSTRUCTION

The maximum depth of cabinets installed above top surface cooking sections must be 13
in (330 mm).

The installation shall be made with a connector that complies with the Standard for
Connectors for Movable Gas Appliances, ANSI Z21.69 – CSA 6.16, and a quick-disconnect
device that compiles with the Standard for Quick – Disconnect Devices for Use With Gas
Fuel, ANSI Z21.41 – CSA 6.9.

The manual valve must be installed in an accessible location in the gas piping.
PREPARING FOR INSTALLING:
1. Unpacking the Range
Unpack the parts box and verify that all required components have been provided.
If any item is missing or damaged, please contact your dealer immediately. Do not install a
damaged or incomplete appliance.
2. Removing the Oven Door

Do not attempt to disengage the hinge catches with the door(s) removed from the
range. The hinge springs could release causing personal injury.

Do not lift or carry the oven door(s) by the handle.
 To make the range easier to move, remove the door(s) to reduce weight.
3. Electrical connection
For personal safety, do not use an extension cord with this
appliance. Remove house fuse or open circuit breaker
before beginning installation.
Only a 4-conductor power-supply cord kit rated 125/250V,
50A, with ring or fork type connector and marked for use
with ranges shall be used.
CUSTOMER SERVICE INFORMATION
The serial number, model can be found on the inner side of door trim.
For all other information about the appliance, see the labels on the back
of the appliance.