Please observe the following
1
1.3
For Your Safety
For safe and successful operation of the unit, read these instructions completely.
If the instructions are not observed, the manufacturer can assume no responsibility.
Damage to the power cord or the housing can result in contact with voltage carrying parts that
is dangerous to life.
●
Check the power cord and the unit before each use.
If the power cord or the unit is damaged, do not operate!
Replace a damaged power cord with a new one.
●
The unit may be opened and repaired only by an authorized Loctite service representative.
1.4
Usage
The Semi-Automatic Controller 97102 controls the exact application of LOCTITE Products from a
product reservoir by means of a dispensing valve.
It can be combined with the following LOCTITE Units to from a dispensing system:
1 Product reservoir
(product tank or cartridge reservoir emptying unit with or without low level and empty sensor).
1 Pneumatic dispensing valve.
Depending on the combination of components, it is possible to dispense the following products:
– Anaerobic curing adhesives
– UV light curing adhesives
– Humidity curing cyanacrylate adhesives
30
