SECTION 4.2 - 4.3
25
4.2 Unlocking with Fingerprint
Place a registered finger to the
fingerprint
scanner
located on the
exterior side
of the lock
to the right.
To register a
fingerprint
, please see
Section 3.6
.
If your fingerprint is
registered
and acknowl-
edged, you will hear a “beep” sound and a
Green LED
will light up on the
fingerprint
scanner
. You can then open the door.
If you see a
Red LED
, it means your fingerprint is
not recognized. You must wait until the red LED
is off to try again.
For best fingerprint scanning practices, see
Section 3.6
To lock your smart lock, press the
OK Button
anytime or brush your hand across the
screen when the lock is unlocked.
OK Button
Locking
Unlocking
CARD
Light up the screen by touching the keypad and tap
your
RFID
card closer to the panel. You can push
down the handle and open the door after it chimed.
Lockly Guard Ingress can support up to 1000 RFID
cards. Additional RFID cards can be ordered through
our customer hotline: +1 (855) 562-5599 or by email:
4.3 Unlocking with RFID
CARD
xxxxxxx xxxxxx
x
R
