SECTION 3.11
21
3.11 Adding a Wireless Device
While in Programming Mode, select
“2PR”
to add or delete a wireless device. If
you are not in Programming Mode, please see
Section 3.1
to enter Programming
Mode.
After pressing
“2PR”
, select
“AD”
to add a wireless device.
You have entered the pairing mode when
"PR"
button flashes. You have the
options to pair
"01 "
Wireless Transceiver or
"02"
Wireless Doorbell. Select the
wireless device you want to pair. You will hear a long beep and see the green
light indicator when the device is paired successfully.
If pairing is unsuccessful, you will hear a beep and
three red light indicator
flashes
and it will exit the pairing mode. You will need to re-enter the
programming mode, then pairing mode
"2PR"
to re-pair the device.
Select
“AD”
to add a wireless device, and the
“PR”
icon
will flash. At this time, please enter the Lockly Guard LINK+
(PGH222), the Wireless Transceiver (PGA300RF) or the
Wireless Chime (PGA381) into the pairing mode. When
you hear a long beep and the green light indicator is ON,
the wireless device pairing is successful. If pairing is
unsuccessful within 3 minutes, you will hear a beep, red
light will blink x 3, then exits the pairing mode.
Press
“PR”
in the setting main
interface to enter the wireless
device pairing mode.
You can select
“AD”
to add
wireless devices or
“DE”
to
delete wireless. devices.
