Page 5
7. EXHAUST ACTIVATION
Do not run the Vulcan Plasma Cutter without the appropriate ventilation system turned on.
To begin the dialog between the controller and the office
computer, press the CONTINUE key.
Sp 300.0
Kf 0.0
Centre
Speed
Kerf
Continue
The office computer will then request the operator to input
the job number. The job number can be found at the top of
the
SHEET CUT LISTING
. Use the numbered keys and
press ENTER.
JOB NUMBER (0 =
QUIT):
The computer will respond by sending a request to the
controller:
0
To select a sheet from the Vulcan fittings program.
1
To select a part from the Vulcan parts program.
2
To select an insulation job from the Vulcan
program.
Input your choice and press the ENTER key.
JOB TYPE
(0 = SHEET,
1 = PART, 2 = INS):
After entering the job number, the office computer will ask
you to enter the sheet number you wish to cut. When
starting a new job, this will be sheet number 1. When
downloading of the first sheet is complete, the secondary
menu will appear and you will be ready to begin cutting.
SHEET NUMBER
(0 = QUIT):
If one piece of a sheet needs to be cut, press BLANKS (2)
rather than SHEETS. This allows for an individual piece
being cut from a single sheet without cutting any other
pieces..
SHEETS (1)
OR
BLANKS
(2):
Secondary Menu
Plasma
selected
Cut
MDI
Dry Run
H. WEISS MACHINERY & SUPPLY
H. WEISS MACHINERY & SUPPLY
PHONE: (718) 605-0395 - www.hweiss.com
