INSTALLATION OF THE PROXIMITY SWITCH AND EMERGENCY PUSHBUTTON.
Remove the bumper bracket and end cap from the carriage tubing. Remove the bag of components.
Open the bag and remove its contents. Install the proximity switch back into the tubing and out
through the mounting hole A . Add the saddle washer and nut. The end of the sensor should be
set to allow .062" clearance between it and its pickup block located on the carriage.
CAUTION ... APPROPRIATE CLEARANCE MUST BE PROVIDED OR DAMAGE WILL RESULT.
To install the emergency stop, refer to the accompanying illustration.
Page 4
NYLON WASHER
EMERGENCY STOP
END CAP
NUT
NUT
SADDLE WASHER
BUMPER BRACKET
RUBBER WASHER
SENSOR
"X" BEAM
PUSH BUTTON
A
PROXIMITY SWITCH
MOUNTING HOLE
H. WEISS MACHINERY & SUPPLY
H. WEISS MACHINERY & SUPPLY
PHONE: (718) 605-0395 - www.hweiss.com
