Lochinvar CH 100 CE, Installation, Commissioning, User & Maintenance Instructions

Page: 41 / 66

Instruction manual CH 41
gis
7 The control panel
7.1 Introduction
Topics covered in this chapter, in sequence:
•
Control panel
• Explanation of icons
• On/off switch
• Control thermostat
• Weekly timer circuit ;
• Flue gas thermostat reset button .
7.2 Control panel
This figure shows the control panel.
The control panel
The control panel comprises:
•
an ON/OFF switch (with positions I/0/II );
• a control thermostat with rotary knob;
• a weekly timer (optional);
• a Power Anode indicator LED (optional).
7.3 Explanation of icons
The table explains the meanings of the icons.
Icons and their meaning
7.4 On/off switch
Using the ON/OFF switch, set the appliance to the ON
mode (position 'I'), OFF mode (position '0'), or the
weekly program mode (position 'II'). See '
Operating
modes '.
The appliance remains live, even when in the OFF
mode. This ensures that the frost protection remains
activated.
Note
To isolate the appliance electrically, you must use
the isolator between the appliance and the mains
power supply.
7.5 Control thermostat
Use the rotary knob on the control thermostat to set
the desired water temperature to between ±40°C and
±70°C. The knob rotates over a scale of 1 to 4. The
table shows the temperatures corresponding to each
position.
Temperature setting
Name Meaning
ON/OFF switch Sets appliance mode
to 'ON',
'Week Program' or
'OFF'.
Temperature
control
Set water temperature
(Tset)
1 weekly timer Sets the weekly water
heating program
2 Power Anode
indicator lamp
Shows Power Anode
status
Position Temperature
1 approx. 40°C
2 approx. 50?
3 approx. 60?
4 approx. 70?