Lochinvar CH 100 CE, Installation, Commissioning, User & Maintenance Instructions

Page: 18 / 66

Installation
18 Instruction manual CH
3
is
3.3 Ambient conditions Caution
The water heater may not be used in rooms where chemical substances are
stored or used due to the risk of explosion, and corrosion of the water heater.
Some propellants, bleaching agents and degreasing agents etc. disperse
vapours that are explosive and/or cause accelerated corrosion. If the water
heater is used in a room in which such substances are present, the warranty will
be void.
CH appliances are open appliances and may only be installed in an open boiler
room. They are type B
11BS
.
3.3.1 Air humidity and ambient temperature
The boiler room must be frost-free, or be protected against frost. The table
shows the ambient conditions that must be adhered to for correct functioning of
the electronics present in the water heater to be guaranteed.
Air humidity and ambient temperature specifications
3.3.2 Maximum floor load
Allow for the appliance's weight with respect to the maximum floor load; refer to
the table.
Weight of the appliance filled with water
Air humidity and ambient temperature
Air humidity max. 93% RH at +25°C
Ambient temperature Functional: 0 < T < 60°C
Weight (kg) of the appliance filled with water
CH 100 507
CH 155 507
CH 200 510
CH 300 581
CH 400 576
CH 500 525
CH 600 526