Maschinenvertrieb
LIYU DMS GmbH
www.liyu-dms.com
44
ink box. The colors are marked as K (black), C (blue), M (red) and Y (yellow). The last
one without label is filled with cleaning fluid. Examples are shown in the following figure:
Inject ink into the auxiliary ink tank
Please make sure that there is enough ink in the main ink bottle before injecting ink into
the auxiliary ink tank and the steps are as follows:
Ensure that there is enough ink in the main ink bottle and conduct inspection of the
machine before starting.
When you switch on inkjet printer for the first time, since the auxiliary ink tank is
empty, ink pumps of all colors will start working automatically and pump ink from
main ink box into auxiliary ink tank.
When all the ink pumps stop working, it means all the auxiliary ink tanks have been
injected with ink.
The transient buzzer sound during the process may be resulted from rather long
ink pump route and timeout.
In the event of ink pump not working or prolonged alarming of buzzer, please switch
off the machine in time and examine. In case of failure to settle the problem, please
contact the local dealer or after-sales department of our company immediately.
Inject ink into the print head
Since it is a very important operation to inject ink into the print head, please operate in
strict accordance with requirements. There are two critical operations, namely print
head cleaning and venting.
Print head cleaning:
ink for the first time because protective liquid has been injected into the nozzle of
print head. You must wash off the protective liquid before injecting ink.
