Maschinenvertrieb
LIYU DMS GmbH
www.liyu-dms.com
53
The position and breadth are not necessarily accurate due to the sensor and other
reasons. In case of large deviations during printing, you can adjust to the relatively
accurate value through the dialog box “correction”.
Positioning operation after successful detection:
there are two methods for
positioning after detection:
1. Switch positioning method to carriage origin and fill in the corresponding origin
location through the position and breadth of materials obtained.
2. Select the image position and print directly in the current interface. Here are three
typesetting modes provided, namely boundary printing, central printing and user-
defined. You can directly set the distance from the image to the boundary, as
shown in the following figure:
Dete
ctio
