Maschinenvertrieb
LIYU DMS GmbH
www.liyu-dms.com
20
4
Temperature
Controller and
Heating
Start
Switch
As shown in the figure, heating switch of the print head
and temperature controller are on the left, while
infrared heating and drying system switch and
temperature controller on the right.
5
Machine
Power
Interface
Provide power for the machine FH32.
6
Machine Air
Interface
Provide air for the machine FH32.
7
Rear Door of
Left Case
Open the door, you can see the power switch and
pneumatic assembly
8
Clump weight
and its Bracket
The clump weight can be adjusted while printing on
different media (breadth, weight and texture) to ensure
the printing effect.
9
Inflatable shaft
Push the shaft through the paper tube of the printing
media and place it at the position as shown in the
figure, media feeding fastening device.
10
Rear Door of
Right Case
Open the door, you can see main ink tank (2.5L) and
ink pump filter components. Open the door during ink
injection.
11
Take-up and
Feeding
Diversion
Button
The buttons on the left are: 1 Positive and negative
switching button 2. Feeding button 3. Take-up button
Front view (open state)
