Livingston & Company WELDWISE 2400, User Manual

Page: 65 / 195

0433-INS-400 Rev. E
6-19
•
Export Masters To Floppy
This option is the same as the Export Masters
command above, except that the archive
database is compressed and stored to a floppy
disk. This command will overwrite any masters
written by a previous
Export Masters To
Floppy command. Only one masters archive
can be stored on a floppy disk.
Note:
A floppy disk can typically hold 1.4MB. If
the data you are trying to export exceeds that
size, it should be transferred via a networked
computer. Call Livingston Service for
additional information.
WARNING : Welds cannot be monitored while
the Export Masters to Floppy option is in
use. Any remote user interface windows
must also be closed
. If the Cancel button is
used, the weld monitor must be shut down and
restarted. DO NOT shutdown the weld
monitor during this operation.
•
Export Setup
This option saves the current general setup and
sensor calibration information to an archive
database. The setup archive database file name
is
setup.mdb . This command will overwrite
the existing setup and calibration data.
WARNING : Welds cannot be monitored while the Export Masters to Floppy option is in use.
Any remote user interface windows must also be closed . If the Cancel button is used, the weld
monitor software must be shut down and restarted. DO NOT shutdown the weld monitor during
this operation.
•
Export Setup To Floppy
This option is the same as the Export Setup command above, except that the archive database is
compressed and stored to a floppy disk. This command will over-write any setup information
written by a previous
Export Setup To Floppy command. Only one setup archive can be stored
on a floppy disk.
WARNING : Welds cannot be monitored while the Import Setup From Floppy option is in use.
Any remote user interface windows must also be closed . If the Cancel button is used, the weld
monitor software must be shut down and restarted. DO NOT shutdown the weld monitor during
this operation.
Figure 6-31 Export Setup
Figure 6-32 Export Setup to Floppy