8
Gebruiks- en montagehandleiding inbouwbranders/ Operating and assembly instructions built in burners / manuel de montage et mode d'emploi
User and installation instructions
Contents of this document
1.
Important safety instructions
2.
Assembly instructions
3.
User manual
4.
Specification Livin’ flame
1. Important safety instructions
In case of use of the Livin’ flame built in burner these safety instructions should always be followed to reduce
the risk of fire and other damage to people and property. Read these safety instructions carefully before the
Livin’ flame built in burner is put into operation.
1.
According to the mounting instructions the Livin’ flame built in burner must always fitted correctly.
The Livin’ flame built in burner should be placed straight on a hard, stable surface.
2.
The device must be placed far away from flammable materials (min. 2 meters) and the area around
the appliance must be clear of combustible materials and/or liquids.
3.
Before use, check if all connections to the cylinder are properly fitted and not loose. If the connections
are loose, make sure everything is fixed and tied before use. Make sure that the gas is turned off while
fixing.
4.
Every time the gas connection is re-connected, the gas connection and hose must be monitored for
leaks. See chapter 2.5.
5.
The hose must never come into contact with the hot surface of the burner.
6.
The hose must comply with the national laws and regulations . The hose is connected to the supplied
gas pressure regulator .
7.
Never change the air valve settings of the burner . If the air vents of the fire rings are choking , turn
right into a gas technical specialist .
8.
Never obstruct the free flow of air and oxygen to the device . Never change anything to the gas -
technical system of this unit . Any change to the system can be dangerous and will void any warranty
on the device .
9.
Keep children and pets away from the unit more than sufficient . The Livin’ flame built in burner has
components which become very hot when in use. Wait after use until the appliance has cooled down
before children and pets come with the device in the vicinity . We recommend a minimum of 1.5
hours to wait .
10.
Never move the Livin’ flame built in burner if the device is in use . Wait at least 1.5 hours after use
before moving it.
11.
Never leave the Livin’ flame built in burner during use without supervision
12.
The device has an open fire , make sure that during use of the Livin’ flame built in burner there will
always be supervision on children and pets by a mature and responsible person.
13.
Do not touch the lava rocks and ceramic logs until it is completely cooled down
14.
Turn off the gas supply after use.
15.
Wait at least 1 hour after use before placing the PVC cover on the unit . If the cover is placed before
the Livin’ flame built in burner is complete cooled down there can be occurs damage to the cover, or
even a fire may occur.
16.
The Livin’ flame built in burner is designed to bring warmth and should only be used outdoors .
17.
Always use the prescribed gas cylinders as described in this manual .
18.
The Livin’ flame build in burner should always be used outdoors or in well -ventilated areas. This could
include greenhouses or conservatories . A well-ventilated room is open for at least 25% of the total
area.
19.
Be careful, accessible parts may be very hot . Always keep this user and installation manual of the
equipment .
20.
Ensure that the hose is always bent straight down towards the cylinder and never printed against hot
surfaces of the model.
