LIVARNO LUX 14131202L, Assembly, Operating And Safety Instructions

Page: 25 / 28

25 GB
Introduction Introduction / Safety
Technical Data
Model no.: 14131202L
Operating voltage: 230–240 V∼, 50 Hz
Bulb:
1 LED module, 3.5 W
Protection class: II /
Safety
Safety notices
Damage due to failure to comply with these operat-
ing instructions will invalidate the warranty! We
assume no liability for consequential damage! We
assume no liability for material damage or personal
injury due to improper handling or failure to comply
with the safety instructions!
RISK OF FATAL
INJURY AND ACCIDENT HAZ-
ARD FOR TODDLERS AND SMALL
CHILDREN!
Never leave children unattended with the
packaging material. The packaging material
represents a danger of suffocation. Children
frequently underestimate the dangers.
This device may be used by children aged
8 years and up, as well as by persons with re-
duced physical, sensory or mental capacities,
or lacking experience and/or knowledge, when
supervised or instructed in the safe use of the
device and they understand the associated risks.
Do not allow children to play with the device.
Cleaning and user maintenance must not be
performed by children without supervision.
RISK OF INJURY!
Do not leave the lamp or packaging material
lying unattended. Plastic film or bags, Styrofoam
etc. can become dangerous toys for children.
Avoid the risk of fatal injury
from electric shock
Always check the mains supply for damage
before connecting the light to the mains. Never
use the light if it shows any signs of damage.
The illuminant in this light is not replaceable;
if the illuminant has reached the end of its life,
replace the entire light.
In the event of damage, repairs or other prob-
lems with the light, please contact the service
centre or an electrician.
Ensure that the light does not come into contact
with water or other liquids under any circum-
stances.
Never open or insert anything into electrical
fittings or equipment (e.g. switches, fitting socket).
This will pose a risk of fatal injury from electric
shock.
Only touch the insulated area of the mains sup-
ply when connecting to or disconnecting from
the mains!
The flexible outer cable is not replaceable; if
the cable is damaged, the lamp must be dis-
posed of.
Before every use, verify the available mains
voltage matches the required operating voltage
of the light (see „Technical Data“).
Always unplug the mains supply from the mains
prior to assembly, disassembly, cleaning or if
the light will not be used for extended periods.
This light is not suitable for dimmers
or electronic switches.
Safe working
Position the lamp so it is protected from moisture
and dirt.
Always be attentive! Always pay attention to
what you are doing and use common sense.
Do not cover the lamp with objects. Excessive
heat can result in fire.
Do not look into the LED from a close distance
during operation.
Do not look into the LED with an optical instrument
(e.g. magnifier).
In order to disconnect the light completely from
the power supply, the mains supply must be
removed from the socket.
The fixed LED module is not replaceable. If the
LED module is damaged, please dispose of the
light.