LIVARNO LUX 14131202L, Assembly, Operating And Safety Instructions

Page: 26 / 28

26 GB
Warranty and Service
Start-up
Assembly
Attach the reflector
1
to the tube
6
and ro-
tate the reflector
1
clockwise up to the stop.
Carefully pull the cable
4
out through the
lamp base
3
.
Push the tube
6
through the lamp base
3
.
Place the washer
7
, toothed washer
9
and
the nut
8
over the thread and tighten with the
tool
10
.
Turn the reflector
1
into the desired direction.
The reflector
1
can be rotated to an angle of
approx. 330°. Please be gentle when orientat-
ing the reflector
1
between the attachment
points.
Switching the light on / off
Plug the power supply
5
into a properly
installed socket.
Switch the lamp on or off using the ON / OFF
switch
2
.
Adjusting the reflector
or spotlight
Note: Only change the position of the reflector
1
if the lamp is turned off.
Allow the light to cool off completely.
Turn the reflector
1
to the desired position.
The reflector
1
can be rotated to an angle of
approx. 330°. Please be gentle when orientat-
ing the reflector
1
between the attachment
points.
Angle the reflector
1
to your liking.
Maintenance and Cleaning
Note: The device is maintenance-free.
The LEDs are not replaceable.
DANGER OF ELECTRIC
SHOCK!
First, unplug the mains supply
5
from the socket.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the lamp to cool down completely.
RISK OF ELECTRIC SHOCK!
For electrical safety, never clean the light with
water or other liquids, or immerse it in water.
Do not use solvents, benzene or similar sub-
stances. They could damage the light.
Unplug the mains supply
5
from the socket.
Only use a dry, lint-free cloth for cleaning.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal author-
ity for more details of how to dispose of
your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
hours can be obtained from your local
authority.
Start-up / Maintenance and Cleaning / Disposal