Lissmac SBM-L 1000 G1S2 ALU MIX, Operating Manual

Page: 45 / 82

Operation
Grinding Machine SBM-L 1000+1500 G1S2 ALU MIX 45
5.3.10 Setting sheet thickness
Before processing, the sheet thickness of the workpieces must be measured
and adjusted on the machine.
Abb. 37: Setting sheet thickness
1 "Sheet thickness" display (see 5.3.9.4)
2 Set sheet thickness joystick
3 "Sheet thickness setting" gear selection lever
NOTE
Workpieces remaining in the machine
Damage to the machine

Ensure that no workpieces are in the machine.

The sheet thickness cannot be set correctly.

Move the gear selection lever (
3)
to the lowest position (Gear 1).

The sheet thickness information is shown in the display (1).

Use the joystick (2) to set the sheet thickness to the value measured.