Lissmac SBM-L 1000 G1S2 ALU MIX, Operating Manual, Page: 68 / 82

Service/Repair
Grinding Machine SBM-L 1000+1500 G1S2 ALU MIX 68
7.2.4 Tensioning the V-belts
Abb. 64: Tensioning the V-belts
1 Drive motor screw fasteners
2 Counter nut
3 Counter nut
4 Drive motor V-belt pulley

Turn counter nut (3) all the way back.

Use counter nut (2) to tension the drive motor V-belt pulley (4) until the V-
belt can still be pushed in about 1 cm on its longest segment.

Tighten the screw fasteners (1) with the tightening torque (see Chapter
8.3).
7.2.5 Installing the support bar
Abb. 65: Installing the support bar
1 Support bar
2 Screw fasteners

Place the support bar (1) between the hydraulic belt tensioner and the
belt pulley bracket.

Tighten the screw fasteners (2) with the tightening torque (see Chapter
8.3).