Lissmac SBM-L 1000 G1S2 ALU MIX, Operating Manual

Page: 81 / 82

Warranty
Grinding Machine SBM-L 1000+1500 G1S2 ALU MIX 81
10 Warranty
The warranty for this machine is 12 months. For the following listed wear
parts the warranty only applies if the wear is not caused by operation.

Feed and drive elements, such as toothed racks, gears, pinions,
spindles, spindle nuts, spindle bearing, cables, chains, chain wheels,
belts

Seals, cable, hoses, collars, connectors, couplings and switches for
pneumatics, hydraulics, water, electrical, fuel

Guide elements, such as guide strips, guide bushings, guide rails,
rollers, bearings, anti-slide plating

Tension elements from quick-coupling systems

Plain and roller bearings, which do not run in oil bath

Shaft sealing rings and sealing elements

Friction and overload couplings, braking equipment

Carbon brushes, collectors

Easily dissolvable rings

External potentiometer and manual switching elements

Fuses and lamps

Auxiliary and operating materials

Fastening elements, such as pegs, anchors and screws

Lamella

Diaphragms

Sealing brushes, sealing rubber, splash guard cloths

All types of filters

Drive and deflector rollers and bracings

Running and drive wheels

Transport belt

Rubber scrapers

Needle felt protection

Energy storage

Abrasive belts/grinding belts
Wear parts are parts that with intended use of the machine have limited
operational wear. The wear time is not uniformly specified, it differs
according to intensity of use. Wear parts must be serviced, adjusted, and
replaced as needed corresponding to the specific device's operating manual
provided by the manufacturer.
Wear caused by operation does not qualify for warranty claims.