Lissmac SBM-L 1000 G1S2 ALU MIX, Operating Manual

Page: 52 / 82

Changing abrasives
Grinding Machine SBM-L 1000+1500 G1S2 ALU MIX 52
6.1.3 Remove the sliding block belt
The G unit must be moved into its end position for replacing the sliding block
belt.
For the upper G unit the sheet thickness must additionally be moved to
"zero" (see display).
In order to work on the sliding blocks or sliding block belts, the safety plate
(1) must first be removed on the respective G unit and replaced after the
work is completed.
Abb. 44: Upper G-unit with mounted safety plate
Abb. 45: Sliding block belt
1 Sliding block belt tensioning roller
2 Counter nut
3 Tensioning bolt
4 Screw fasteners

Loosen counter nuts (2) and turn back.

Remove the screw fastener of the tensioning roller (1) (only accessible
with swung out G unit from the rear, 19mm width across flats)

Release the tensioning roller (1) with the tensioning bolts (3).

Remove screw fasteners (4) and slide the deflection roller towards the
rear.

Remove the sliding block belt.