17
3.4 Preparing for cut-off operation
•
Check
- the protection equipment (see 2.2)
- the saw blade (see 1.1.3)
•
Fill water in the tub until the pump stands under water.
•
Put in the feeding cable and connect the water tube
•
Plug the mains supply cable (400V, 32A) into the socket (Pos. 8).
•
The conditional connections (Point 11.) must be observed concerning the
electromagnetic compatibility.
3.5 Test sense of rotation of the saw blade
•
Release the feed lock (Pos. 1)
•
Crank the saw blade with the feed crank (Pos. 6) in a visible position
•
Switch on the switch (Pos. 9)
•
Switch the star-delta switch (Pos. 1) to ”star”.
•
Verify sense of rotation of saw blade.
∗
Sense of rotation seem from the operator side against the clockwise direction
(indication arrow on the saw hood).
