9
1.3
Organisational measures
1.3.1
This operation manual must always be kept and stored ready at hand near the place of operation.
Danger!
1.3.2
Always observe any amendments to present operation manual as well as general
legal and other regulations valid and in force for the prevention of accidents and environmental
protection and make sure hat these will be instructed!
Any such obligations may also apply to the handling of hazardous materials or to personal safety
and protection equipment that is subject to wear or to road traffic law regulations.
Danger!
1.3.3
Before starting to operate, personnel charged with performing any works on the
machine must thoroughly have read this operation manual, particularly the chapter "safety
information" and all warnings described therein, which will be too late to do during operation of
the machine. This applies in particular for any personnel performing occasional routines on the
machine only, such as set-ups, servicing etc.
1.3.4. At least check occasionally if the personal charged with performing any such works observes the provisions specified
in this operation manual and performs works in full awareness of safety requirements and dangers.
Caution!
1.3.5
As far as necessary or required by prescriptions, always
use personal safety equipment.
Danger! 1.3.6.
Observe all safety and danger information indicated on
the machine! (see 1.1.2)
Danger!
1.3.7
Do not remove safety information and warnings on the
machine and keep them in always legible, complete
condition. (see 1.1.2)
Danger!
1.3.8
In case of safety relevant modifications detected on the
machine or if a changed operational behaviour is
detected, please immediately notify the person / authority
responsible thereof.
Danger!
1.3.9
Do not perform any modifications of or make extensions to
the machine whatsoever without the supplier's previous consent!
Danger! 1.3.10 Only use original spare parts from the producer!
Danger!
1.3.11 Thoroughly observe servicing terms as prescribed or
indicated in this operation manual. An annual expert
inspection is obligatory (see 7)!
1.3.12
Carefully clean the machine before inspection.
Danger!
1.3.13 Pull mains plug before performing any repair or
service works.
