11
1.5.2
Special works to be performed with the machine under normal operation, service routines and trouble-
shooting during operation; elimination
Caution!
1.5.2.1 Thoroughly observe adjustment, maintenance and inspection routines at the terms scheduled
including information regarding exchange of parts/equipment parts! These works may be performed by
specialist experts only.
Caution! 1.5.2.2 Always inform operators before starting to perform special works
and servicing routines on the machine! Name a supervisor!
Danger!
1.5.2.3 If the machine is completely off circuit when performing servicing and repair works, make sure that
it is protected against unintentional restart, too (remove the current conduction).
Information 1.5.2.4 Before cleaning the machine with water or with some other cleaning agents always close or cover all
machine openings and apertures using a scotch tape or other means, into which no
water/steam/cleaning agent may penetrate due to safety or functional reasons. Electric motor, switch
and plug connections are particularly endangered. Cleaning by means of a water jet prohibited.
Information 1.5.2.5 Completely remove covers / scotch taped covers after cleaning!
Danger!
1.5.2.6 Tighten screw connections loosened for performing servicing and repair works.
Danger!
1.5.2.7 In case disassembly of safety devices becomes necessary when performing set-up, maintenance
or repair works, said safety devices must be re-assembled immediately after and checked accordingly.
1.5.2.8
Take care that process materials and exchange parts will be eliminated in a manner that is
friendly to the environment!
1.6.
Information about special kind of dangers
1.6.1
Electric energy
Danger!
1.6.1.1
Use original fuses apt for the prescribed current intensity
rate only! Switch off machine immediately in case
troubles with the electric power supply to the machine
occur!
Danger!
1.6.1.2
Only perform maintenance and repair works if the
machine is off circuit.
Danger!
1.6.1.4
The electric equipment of the machine must be
controlled / inspected regularly. Any defects such as
loose connections or damaged cables respectively must
be eliminated immediately.
1.6.1.5 If the machine is disconnected from the power mains
during operation before the main switch is reset, the low-voltage trigger takes
effect. The machine can only be started when the main switch is turned back.
1.6.2
Dust
1.6.2.1
During the separation of the mineral material you produce a dust which is breathable and can enter in the
lung.
Therefore you have to work always with a water sprinkling.
