Advanced settings
The advanced settings are reachable via the menu which is based on a tab structure.
Program
Automatic program/Manual timer program
Setup
Setting up power, language and restoring factory settings
DMX
Channel settings for DMX
RC
Settings for wireless remote control
To open the menu and change settings:
-
Press the “MENU” button to open the menu.
-
The blinking cursor indicates which item is selected. Move the cursor to the desired
setting with the “UP” and “DOWN” button. Choose the desired setting by pressing the
“ENTER” button. The chosen setting should now be flashing.
-
Change the setting with the “UP” and “DOWN” button of the panel and press “ENTER”
to validate your choice.
-
To access a different tab, put the cursor on the item in the lower right section (5) and press
the “ENTER” button. The next tab will then be opened.
-
Press the “MENU” button to close the menu.
If the menu is opened but is idle for a long period it will automatically close.
Automatic Program
1.
Menu
The menu tab shows the available tabs.
2.
Delay
As soon as the “RUN” button is pressed, the generator will wait
during the selected delay time before starting the program.
Set the delay to 0:00 to deactivate the delay.
3.
Mode
AUTO means automatic program.
4.
Space
Size of the area: Small/Medium/Large.
5.
Next tab
Next tab is Setup.
6.
Cursor
The cursor indicates which menu item is active.
To adjust the automatic program:
-
Open the menu and go to tab
program (1)
-
Set the
mode (3)
to
auto
.
-
Set
area (4)
to the desired size:
o
Small
15 - 20 m
3
o
Medium
30 - 50 m
3
o
Large
200 - 250 m
3
-
If a delay before the generator starts working is desired, fill this in in
delay (2)
.
-
Press “MENU” to leave the menu. The main screen will be shown again.
-
Press “RUN” to start the program.
