Remote Control
The generator can be operated at distance thanks to the optional wired remote control. As long as
the button is pressed, the generator will produce smoke based on the chosen smoke density. Select
the smoke density by using the “UP” and “DOWN” buttons on the generator.
Plug the remote control in at the back of the generator. Wait until the generator is warmed up (the
screen will show “READY”) and push on the button of the remote control.
The generator will keep producing smoke as long as the button is pressed in.
Wireless Remote Control
The generator can be controlled via the four buttons, CONT, RUN and STOP of the optional
wireless remote control
The wireless remote control can operate two different generators at a time (group A and B)
separately from each other or at the same time (multiple machines in the same group react at the
same time to the buttons of the RC).
Watch out! The RC only works when the display shows the main screen. If the menu is visible,
the generator won’t react to the RC.
See chapter 4.5 for setting up the wireless remote control.
1.
Group A
Controls the generator(s) set up in group A
2.
Group B
Controls the generator(s) set up in group B
Smoke Density
Smoke density is adjustable in continuous mode or manual timer program. The smoke density
is preprogramed in all other modes.
To set up smoke density:
-
Make sure that the main screen is showing on the display.
-
Push the “UP” button to increase smoke density (maximum 100%) or press the
“DOWN” button to lower the smoke density (minimum 5%).
