Synopsys
Setting up and powering up.
-
Attach the cable to the back of the
SG4000™ and plug it into a socket (230V / 10A).
-
Turn on the generator.
-
Wait until the display shows “READY”. The SG4000™ smoke generator is ready to be used.
SMOKE / BOOST
-
Wait until the generator reaches the right temperature.
-
Press the SMOKE button and hold it down until the smoke production starts.
-
Release the SMOKE button to stop smoke production.
CONTINUOUS
-
Wait until the generator reaches the right temperature.
-
Press the CONT button to start the smoke production.
-
Press the STOP button to stop smoke production.
SMOKE DENSITY
Smoke density is adjustable for CONT and TIMER modes.
The smoke density is only adjustable when the menu is shown on the display.
-
Press the UP button to increase the smoke density (max. 100%).
-
Press the DOWN button to decrease the smoke density (min. 5%).
AUTO/TIMER
-
Set the desired program (AUTO or TIMER) and the parameters (delay, space or time/repeat)
via the menu.
-
Press the RUN button to start the program.
-
Press the STOP button to stop the program.
FULL OR HALF POWER
-
Open the menu and go to the “SETUP” tab.
-
Set the power to 2000w for full power or 1000W for half power.
-
Close the menu.
