Changing the RC identification code
Every RC has its own identification code. It can happen that multiple RC’s share the same code.
The consequence is th
at the generator is controlled by many RC’s at the same time even though
that may not be wished.
In that case, the identification code of the RC can be
changed. To do this, follow these steps:
-
Press the paperclip to hit the hidden
“CREATE” (3)
button.
-
De blue indicator (2) should be flashing now.
-
Press
all
the buttons on the front of the remote one by one.
-
Press the paperclip to hit the hidden “CREATE” (3) button.
-
The blue indicator should stop flashing.
The RC now has a different identification code and
needs to be “re-memorized” by the generator.
1.
Clip
2.
Blue indicator
3.
CREATE button
4.
Battery cover
5.
Battery cover opening
Replacing the RC battery
If the strength of the RC signal should diminish, the battery needs to be
replaced. To replace the battery:
Remove the battery cover (4) by inserting a screwdriver in the opening (5) and pushing
upwards. Remove the battery (Type CR2032) en replace it with a new one.
Note the polarity; insert the new battery with the "+" visible to the user.
