LinMot C1150-DS-XC-0S, Installation Manual

Page: 28 / 29

Installation Guide C1100
Page 28 of 29 0185-1062-E_6V12_IG_Drives_C1100 NTI AG / LinMot
16
Declaration of Conformity CE -Marking
NTI AG / LinMot ®
Bodenaeckerstrasse 2
8957 Spreitenbach
Switzerland
Tel.:
+41 (0)56 419 91 91
Fax: +41 (0)56 419 91 92
declares under sole responsibility the compliance of the products:
•
Drives of the Series C11x0-xx-XC-xS-xxx
with the
EMC Directive 2014/30/EU .
Applied harmonized standards:
• EN 61000-6-2: 2005 (Immunity for industrial environments)
• EN 61000-6-4: 2007 (Emission for industrial environments)
• EN 61326-3-1: 2008 (Functional safety)
According to the EMC directive, the listed devices are not independently operable products.
Compliance of the directive requires the correct installation of the product, the observance of specific installation
guides and product documentation. This was tested on specific system configurations.
The safety instructions of the manuals are to be considered.
These products are intended for installation in machines. Operation is prohibited until it has been determined
that the machines in which these products are to be installed, conforms to the above mentioned EC directive.
The product must be mounted and used in strict accordance with the installation instructions contained within
the installation guide, a copy of which may be obtained from NTI AG.
Company: NTI AG
Spreitenbach, 11.04.2016
----------------------------------------------------
Dr. Ronald Rohner / CEO NTI AG