Chapter 3: Getting to Know the
Wireless-G USB Pen Type Network
Adapter
The Network Adapter is connected to your PC through its USB port. All power
is provided through the USB connection, making a power adapter unnecessary.
The Network Adapter’s LEDs show you how the Adapter is functioning.
Power
Green.
This LED will light up to let you know that the Adapter is
adequately powered over the USB connection.
Link
Green.
The Link LED will be lit steadily when the Network
Adapter is connected to your wireless network. The LED will
blink when there is wireless network traffic.
The USB Port
The Adapter’s LEDs
Chapter 4: Software Installation and
Configuration for Windows 2000
The Wireless-G USB Network Adapter Setup Wizard will guide you through
the installation procedure. The Setup Wizard will install the WLAN Monitor
and driver, as well as configure the Adapter.
1. Insert the
Setup Wizard CD-ROM
into your CD-ROM drive. The Setup
Wizard should run automatically, and Figure 4-1 should appear. If it does
not, click the
Start
button and choose
Run
. In the field that appears, enter
D:\setup.exe
(if “D” is the letter of your CD-ROM drive).
To install the Adapter, click the
Install
button on the
Welcome
screen. Click
User Guide
to view this User Guide or click
Exit
to exit the Setup Wizard.
Figure 4-1
Important:
You must run the Setup Wizard to install the software
before connecting the Adapter.
