2224 Layer 2 Management 24-Port 10/100 Ethernet Switch
nnect II 2224
SNMP FUNCTIONS
If you select SNMP from the Advanced Management screen, the following
SNMP Configurations screen will appear, with the SNMP value highlighted.
The SNMP Configurations screen lets you view all SNMP-related informa-
tion. As this screen shows, the factory default SNMP value is Enabled and
the factory default Community Name value is public.
Use the following procedure to change a value:
1. With the SNMP field highlighted, press the Enter key. The following
SNMP options will appear.
2. Select Disabled or Enabled and press Enter. Your selection will appear
next to SNMP.
3. Use the Down Arrow key to move to Get Community Name and press
Enter. The Enter Get Community Name screen will appear.
69
ProConnect II
®
Series
Spanning Tree Port Priorities
Highlight Spanning Tree Port Priorities in the Spanning Tree Protocol screen
and press the Enter key, a Spanning Tree Port Priorities screen similar to the
following will appear.
Use the following procedure to modify the settings in the Spanning Tree Port
Priorities screen:
1. Use the Up Arrow and Down Arrow keys to highlight the a specific port
or highlight All Ports.
2. Press Enter. The Enter Port Priority screen will appear.
3. Type a port priority, from 0 to 255, and press Enter. A low value gives
the port a greater likelihood of becoming a Root port.
4. To change the priorities of other ports, repeat steps 1 through 3.
5. When you finish, press the Esc key until you return to the desired screen.
68
