Linksys PC22224 - ProConnect II 2224 Ethernet Switch User Manual Download Page 62 | Manualshive

Page: 62 / 62

background image

ProConnect II

®

Series

116

© Copyright 2002 Linksys, All Rights Reserved.

h t t p : / / w w w. l i n k s y s . c o m

Customer Support

For help with the installation or operation of your ProConnect II

®

2224 Layer

2 Management 24-Port 10/100 Ethernet Switch, contact Linksys Customer
Support at one of the phone numbers or Internet addresses below.

Customer Support

(800) 326-7114

Information

(800) 546-5797

Fax

(949) 261-8868

E-mail

[email protected]

Web

http://www.linksys.com

FTP Site

ftp.linksys.com

Linksys Warranty Information

Linksys guarantees that every ProConnect II

®

2224 Layer 2 Management 24-Port 10/100
Ethernet Switch is free from physical defects in
material and workmanship under normal use for
FIVE yeas from the date of purchase. If the product proves defective during
this warranty period, contact Linksys Customer Support to obtain a Return
Authorization Number. When returning a product, mark the Return
Authorization Number clearly on the outside of the package and include your
original proof of purchase. All customers outside of the United States of
America and Canada shall be held responsible for shipping and handling
charges.

IN NO EVENT SHALL LINKSYS’ LIABILITY EXCEED THE PRICE
PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCI-
DENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE
USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS
DOCUMENTATION. LINKSYS OFFERS NO REFUNDS FOR ITS PROD-
UCTS.

Tampering with or disassembling this product voids its warranty.

Linksys makes no warranty or representation, expressed, implied, or statutory,
with respect to its products or the contents or use of this documentation and
all accompanying software, and specifically disclaims its quality, perform-
ance, merchantability, or fitness for any particular purpose. Linksys reserves
the right to revise or update its products, software, or documentation without
obligation to notify any individual or entity.

N

No

otte

e:: You must have your

proof of purchase and a bar-
code from the product’s
packaging on hand when
calling. Return requests can
not be processed without
proof of purchase.

«
...
60
61
62

Summary of Contents for PC22224 - ProConnect II 2224 Ethernet Switch































































Reviews:

No comments

Related manuals for PC22224 - ProConnect II 2224 Ethernet Switch

Brand: Patton electronics Pages: 2

grandMA2 Series

Brand: MA lighting Pages: 36

Brand: QNAP Pages: 20

Brand: CELOT Pages: 34

Brand: Thecus Pages: 120

Brand: XtendLan Pages: 21

Brand: Ariesys Pages: 10

McDATA Eclipse 1620

Brand: Sun Microsystems Pages: 9

Brand: Xantech Pages: 6

Brand: NetCommWireless Pages: 28

Brand: netsys Pages: 243

Internet Security Appliances

Brand: SonicWALL Pages: 293

Brand: Quantum Pages: 140

Brand: Adeunis RF Pages: 9

Brand: Infrant Technologies Pages: 98

Brand: Magnescale Pages: 73

Brand: Netis Pages: 60

Brand: Olicom Pages: 84

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands