2224 Layer 2 Management 24-Port 10/100 Ethernet Switch
nnect II 2224
IP MULTICAST GROUP PERSPECTIVE
The IP multicast group perspective provides information associated with an
IP multicast group. Use the following procedure to obtain an IP multicast
group perspective (prior to this process, set the IGMP in the Other Protocols
section, step 2.):
1. From the L2 Switching DataBase screen, highlight IP Multicast Group
Perspective and press the Enter key. A screen similar to the following
will appear.
2. To obtain a IP multicast group perspective for one of the addresses in the
screen above, use the Up Arrow and Down Arrow keys to highlight an
address and press the Enter key. A screen similar to the following will
appear.
3. To view the VLAN and IP multicast group addresses associated with the
MAC address, highlight a host in the Hosts screen and press Enter. A
VLAN/IP Multicast Group Membership screen similar to the following
will appear.
41
ProConnect II
®
Series
Configuring PVID
The PVID is the VLAN that the port is associated with. By default, all ports
are associated with the default VLAN of 1. If you want to configure the
PVID, highlight the PVID setting from the VLAN & PVID Perspective screen
and press the Enter key. The following screen will appear:
The following steps will show you how to set the PVID.
1. Highlight an individual port you want to configure and press the Enter
key. The Enter New PVID column will appear next to the PVID Settings
screen.
2. Enter a decimal number in the Enter New PVID column. Then press the
Enter key.
40
