manualshive.com logo in svg

Linksys LNE100M, User Manual

Share
Download
Linksys LNE100M User Manual Download Page 57

Instant EtherFast

®

Series

© Copyright 2002 Linksys, All Rights Reserved.

h t t p : / / w w w. l i n k s y s . c o m

Appendix N: Contact Information

For help with the installation or operation of this product, contact Linksys
Technical Support at one of the phone numbers or Internet addresses below.

Sales Information

800-546-5797 (LINKSYS)

Technical Support

888-326-7114

RMA Issues

949-261-1288

Fax

949-261-8868

Email

[email protected]

Web

http://www.linksys.com

FTP Site

ftp.linksys.com

Linksys does not provide technical support for Linux, BSD, or other freeware
and open source operating systems. Although many Linksys products have
been proven to perform well under Linux and other freeware operating systems,
technical support for setup and troubleshooting is not provided. For informa-
tion on where to find device drivers and setup instructions for Linux and other
freeware operating systems, visit the support pages and FAQ files on the
Linksys website at www.linksys.com.

In addition, Linksys does not provide technical support for Beta operating sys-
tems.

105

Summary of Contents for LNE100M


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands