manualshive.com logo in svg

Linksys LNE100M, User Manual

Share
Download
Linksys LNE100M User Manual Download Page 40

8. Having returned to

the Configuration
tab of the Network
screen (shown in
Figure B-8), verify
that Microsoft
SNMP agent is list-
ed and click the OK
button.

9. Windows will now ask you to restart your computer. Click Yes to restart

now.

SNMP has now been added for Windows 98SE and Me. Now, proceed to
Adding the Adapter’s SNMP Agent in this appendix.

These installation instructions are for PCs running Windows NT, service pack
6, only. Screens will appear different and the installation may not work if per-
formed under a different version of Windows NT.

Instant EtherFast

®

Series

5. Browse to your CD-ROM drive (shown as “d:\” in Figure B-5). Open the

Resource Kit fold-
er. Open the netad-
min folder. Open
the  SNMP folder.
Within this folder,
select the file
named snmp.inf
and click the OK
button.

6. The next screen,

shown in Figure B-
6, will show the
path you have cho-
sen to select the
snmp.inf file. Click
the OK button.

7. From the Select

Network Service
screen, shown in
Figure B-7, select
Microsoft SNMP
agent and click the
OK button.

Figure B-8

Installing SNMP for Windows NT

72

EtherFast

®

10/100 Managed Network Adapter

Figure B-5

Figure B-6

Figure B-7

71

Summary of Contents for LNE100M


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands