manualshive.com logo in svg

LINET Multicare X, Instructions For Use And Technical Description, Page: 138 / 169

Share
Download
LINET Multicare X Instructions For Use And Technical Description Download Page 138

                 

                 D9U001MCX-0101_03

138

18.3 Active Mattress (not integrated)

WARNING!

Follow instructions for use of a compatible active mattress carefully!

CAUTION!

Risk of material damage due to an incorrect fixation of compatible active mattress on the mattress support 

platform!

►  Adjust the bed to maximum Cardiac Chair Position before fixing all the straps of the inflated mattress to the 

mattress support platform!

Installation instructions:

►  

Remove any existing mattress.

►  

Observe mattress dimensions and its orientation before putting it on the Mattress support platform.

►  

Place SCU on the foot board of the bed or on the floor.

►  

Fix mattress on the Mattress support platform with straps (

1

).

Fig. 

Bottom of Active Mattress (not integrated)

1

1

1

1

1

1

Fig. 

Bottom of Passive Mattress

1

1

HEAD END

FOOT END

1

18.2 Passive Mattress

Recommended Passive Mattresses are equipped with straps (

1

) intended for fixing mattress on the Mattress support platform.

Summary of Contents for Multicare X










































































































































































Reviews:

No comments