manualshive.com logo in svg

LINET Multicare X, Instructions For Use And Technical Description, Page: 137 / 169

Share
Download
LINET Multicare X Instructions For Use And Technical Description Download Page 137

D9U001MCX-0101_03

           

           137

18 Mattress

Multicare X bed is designed for passive and active mattresses from LINET portfolio.

CAUTION!

Incompatibility with bed due to incorrect mattress dimensions!

►  Check maximum approved mattress dimensions (chapter Technical Specification).

The manufacturer recommends the use of the following mattress systems on the Multicare X bed:

18.1 Fixation of a mattress on the mattress support platform

To fix mattress on the Mattress Support Platform:

► 

Run three straps through the three corresponding holes in the covers of Mattress Support Platform.

► 

Run these three straps under the bars of the Mattress Support Platform.

► 

Lock the three side release buckles by connecting their male and female parts together.

To remove mattress from the Mattress Support Platform:

► 

Release the three buckles by pressing them from both sides and by disconnecting their male and female parts.

► 

Pull these three straps out of the Mattress Support Platform.

►  

Remove mattress from the Mattress Support Platform.

PASSIVE MATTRESSES

■

 

CliniCare 10

■ 

CliniCare 20

■

 

CliniCare 30

ACTIVE MATTRESSES

■ 

Virtuoso Pro (not integrated)

■ 

CliniCare 100 HF (not integrated)

■ 

OptiCare X (integrated)

Fig. 

Fixation of the mattress with straps on the mattress support platform of Multicare X bed

Summary of Contents for Multicare X










































































































































































Reviews:

No comments