AERO.2000 User Guide July 2016
L16/1/18039
©2016 LINEAR ACOUSTIC INC. THE TELOS ALLIANCE. ALL RIGHTS RESERVED
Page 50
6.16
6.16
6.16
6.16
NTP Setup
NTP Setup
NTP Setup
NTP Setup
A reliable time standard is required for time stamping loudness logs and for Nielsen encoding.
The AERO.2000 can synchronize its internal clock to a network time server using NTP. All three
of the time setup menus; Time Zone; NTP; and Set Clock Manually; can be seen in Figure 6-17,
below.
1.
Start by setting your time zone. Time settings should be done before the unit is placed
on-line.
Setting the Time Zone requires a reboot of the AERO.2000!
2.
Next disable NTP and set the time and date manually in the Set Clock Manually menu.
3.
When NTP Synchronization is disabled it allows changes to be made in the NTP server
addresses. Enter the network NTP server addresses and enable NTP.
Figure 6-17
NTP configuration
To verify NTP operation:
1.
Click on NTP tab and Disable NTP Synchronization.
2.
Click on Set Clock Manually and change the time by a few hours.
3.
Go back to NTP tab and see that the time is incorrect.
4.
Enable NTP Synchronization.
