AERO.2000 User Guide July 2016
L16/1/18039
©2016 LINEAR ACOUSTIC INC. THE TELOS ALLIANCE. ALL RIGHTS RESERVED
Page 36
2.
Select Inputs 3/4, 5/6, 7/8, and 9/10 and select the SDI inputs as shown in Figure 3-10.
6.8.3
6.8.3
6.8.3
6.8.3
Output Routing
Output Routing
Output Routing
Output Routing
Select Output Routing > AES/SDI Outputs > SDI Outputs.
The screen looks like Figure 6-12, below.
Figure 6-12
Select Output Routing
•
Select SDI Out 1/2: Instance 1 DD+ Out
Note!
The DD+ Out can be AC3 or H-AC3. This selection is made by navigating to:
Instance 1 > Output > DD+ Encoder > Codec: and selecting from the Drop Down.
Other parameters for the selected Dolby encoder can also be made on this
screen.
•
Select SDI Out 3/4: Instance 1 Processed 7/8
•
Select SDI out 5/6 through SDI out 15/16 to Off.
6.9
6.9
6.9
6.9
Using the Meters
Using the Meters
Using the Meters
Using the Meters
Looking at the Hardware I/O meter (far left) in Figures 6-11 you can see that:
•
The SDI source has 6 channel surround content on the first 3 pairs.
