English Manual
LINDY KVM Extender C5 Pro Installation and Use
page 11
REMOTE Switch 1
OFF: Normal operation.
ON:
(Before power is applied) Places the REMOTE module into flash upgrade mode so that the internal
software can be changed.
(See section 6. Flash upgrade procedure)
Note: When shipped, all switches are set in the OFF positions and this will produce normal operation.
REMOTE Switches 2 and 3
Switches 2 and 3 determine which two keyboard keys (when pressed in unison) are to be designated as
‘hotkeys’. Hotkeys signal to the REMOTE module that the next key to be pressed is a special configuration
command for the module and is not to be passed to the computer system.
2 OFF
Hotkeys = CTRL and SHIFT
3 OFF
2 OFF
Hotkeys = ALT and SHIFT
3 ON
2 ON
Hotkeys = CTRL and ALT
3 OFF
2 ON
Hotkeys disabled
3 ON
REMOTE Switch 4
OFF: Automatic video compensation mode. In this mode circuitry within the REMOTE module will adjust the
video compensation settings automatically at power on to match the length of the cable run (providing
the twisted pair to both modules is connected and both modules are switched on).
ON:
Manual video compensation mode. Use this mode to bypass the automatic compensation circuitry if
manual adjustment is required to improve the video quality. Automatic video compensation disabled.
(Please see section 5.7 ‘Video compensation.’)
