Linde 336 Series, Service Training, Page: 4 / 168

Service Training
2.4.1.2 Steering cylinder and track rod link 4
2.4.1.3 Renewing the steering cylinder seals 6
2.4.1.4 Renewing the wheel hub tapered roller bearings and shaft sealing ring 8
2.4.1.5 Renewing the axle body tapered roller bearings and wipers 10
2.4.1.6 Installing the steering cylinder and track rod link 12
2.4.1.7 Installing the steering axle 14
2.4.2 Power steering control valve 16
2.5 Controls 1
2.5.1 Travel control 1
2.5.1.1 Accelerator sensor 1
2.5.1.1.1 Accelerator sensor output signals 3
2.5.1.1.2 Adjustment of the neutral position 3
2.5.2 Braking 4
2.5.2.1 Renewing the brake linings 4
2.5.2.2 Adjusting the foot brake 4
2.5.2.3 Adjusting the hand brake 4
2.6 Electrical system 1
2.6.1 Compact power module 2
2.6.1.1 Traction power module 2
2.6.1.2 Power module for lift control 4
2.6.1.3 Power module tests 6
2.6.1.4 Installation of the power modules 11
2.6.1.5 Arrangement of control panels in E 20 models 12
2.6.1.6 Arrangement of control panels in E 25 / E 30 model 13
2.6.1.7 Contactor panels 14
2.6.2 Contactors 16
2.6.2.1 Directional contactors 16
2.6.2.2 Regenerative braking contactor 1K5 18
2.6.2.3 Circuit breaker contactor 1K6 20
2.6.2.4 Testing the protective circuitry 21
2.6.3 Fuses 22
2.6.3.1 Main circuit fuses in model E 20 22
2.6.3.2 Main circuit fuses in model E 25 / E 30 22
2.6.3.3 Installation of the main circuit fuses 23
2.6.3.4 Control current fuses in model E 20 24
2.6.3.5 Control current fuses in model E 25 / E 30 25