Lincoln Town Car 2004 Owner'S Manual Download Page 261 | Manualshive

Page: 261 / 304

background image

If you do not use the proper fuel filler cap, excessive pressure or
vacuum in the fuel tank may damage the fuel system or cause

the fuel cap to disengage in a collision, which may result in possible
personal injury.

Choosing the right fuel

Use only UNLEADED FUEL. The use of leaded fuel is prohibited by law
and could damage your vehicle.

Your vehicle was not designed to use fuel or fuel additives with metallic
compounds, including manganese-based additives. Studies indicate that
these additives can cause your vehicle’s emission control system to
deteriorate more rapidly. In Canada, premium grade fuel generally
contains more metallic additives than regular fuel. We recommend using
regular grade fuel. In Canada, many fuels contain metallic additives, but
fuels free of such additives may be available; check with your local fuel
dealer.

Do not use fuel containing methanol. It can damage critical fuel system
components.

Repairs to correct the effects of using a fuel for which your vehicle was
not designed may not be covered by your warranty.

Octane recommendations

Your vehicle is designed to use
“Regular” unleaded gasoline with
pump (R+M)/2 octane rating of 87.
We do not recommend the use of
gasolines labeled as “Regular” that
are sold with octane ratings of 86 or lower in high altitude areas.

Do not be concerned if your engine sometimes knocks lightly. However, if
it knocks heavily under most driving conditions while you are using fuel
with the recommended octane rating, see your dealer or a qualified
service technician to prevent any engine damage.

Fuel quality

If you are experiencing starting, rough idle or hesitation driveability
problems during a cold start, try a different brand of gasoline. “Premium”
unleaded gasoline should not be used (particularly in the United States)
if “Regular” unleaded gasoline is recommended because it may cause
these problems to become more pronounced. If the problems persist, see
your dealer or a qualified service technician.

87

(R+M)/2 METHOD

REVIEW COPY

2004 Town Car

(tow)

, Owners Guide (post-2002-fmt)

(own2002)

,

Market:

USA_English

(fus)

Maintenance and Specifications

261

«
...
259
260
261
262
263
...
»

Summary of Contents for Town Car 2004

















































































































































































































































































































Reviews:

No comments

Related manuals for Town Car 2004

Brand: RaceChip Pages: 20

TRI-FOLD PG9300RF

Brand: Pet Gear Pages: 4

Brand: Connects2 Pages: 8

Brand: Acura Pages: 4

Brand: Scosche Pages: 32

Brand: HAKR Pages: 2

Brand: U.S. General Pages: 3

Brand: Octocam Pages: 35

Chevrolet CAMARO 1969

Brand: GMC Pages: 92

Brand: Axxess Pages: 8

Brand: Chevrolet Pages: 88

Brand: Macally Pages: 19

Brand: TAUBENREUTHER Pages: 10

TRAVEL-AWN 5000

Brand: A&E Systems Pages: 2

Brand: A&E Systems Pages: 4

Brand: Cap-Pack Sport Pages: 2

Brand: Yamaha Pages: 13

Brand: Yamaha Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands