Lincoln Town Car 2004 Owner'S Manual Download Page 109

Page: 109 / 304

Transmit mode

1. Select the button for the desired
channel (for example, for the garage
door you wish to open).

2. Press the button. CHANNEL X
TRANSMIT is displayed.

3. The proper signal is transmitted
to the device being controlled.

4. Release the button.

Note:

If more than one button is

pressed, priority will be given to the
lowest numbered channel.

Erase mode

To erase all three HomeLink

威

channel codes:

1. Simultaneously press and hold
buttons 1 and 3 for 20 seconds.

2. CLEARING CHANNELS will be
displayed when the channel codes
are being erased.

3. CHANNELS CLEARED will be
displayed when the erase operation
is complete.

4. Release buttons 1 and 3.

REVIEW COPY

2004 Town Car

(tow)

, Owners Guide (post-2002-fmt)

(own2002)

Market:

USA_English

(fus)

Driver Controls

109

Summary of Contents for Town Car 2004

















































































































































































































































































































Search results

Summary of Contents for Town Car 2004

Reviews:

Related manuals for Town Car 2004

Brands by name

Popular brands

Lincoln Town Car 2004, Owner'S Manual

Search results

Summary of Contents for Town Car 2004

Reviews:

Related manuals for Town Car 2004

Brands by name

Popular brands