manualshive.com logo in svg

Lincoln Town Car 2004, Owner'S Manual

The 2004 Lincoln Town Car Owner's Manual is a comprehensive guide that provides detailed instructions on operating and maintaining your vehicle. Available for free download at manualshive.com, this manual offers valuable insights, troubleshooting tips, and safety information to ensure a seamless driving experience with your Lincoln Town Car.

Share
Download
background image

Use the following guidelines to avoid static build-up when filling an
ungrounded fuel container:

•

Place approved fuel container on the ground.

•

DO NOT fill a fuel container while it is in the vehicle (including the
cargo area).

•

Keep the fuel pump nozzle in contact with the fuel container while
filling.

•

DO NOT use a device that would hold the fuel pump handle in the fill
position.

Fuel Filler Cap

Your fuel tank filler cap has an indexed design with a 1/8 turn on/off
feature.

When fueling your vehicle:

1. Turn the engine off.

2. Carefully turn the filler cap counterclockwise 1/8 of a turn until it
stops.

3. Pull to remove the cap from the fuel filler pipe.

4. To install the cap, align the tabs on the cap with the notches on the
filler pipe.

5. Turn the filler cap clockwise 1/8 of a turn until it stops.

The “Check Fuel Cap” light illuminates when the ignition is turned to the
ON position. It will also illuminate when the fuel filler cap is not properly
installed. Proper fuel filler cap installation is checked automatically as
the vehicle is driven, but not until after some fuel is used (fuel gauge
drops below full). Once the fuel filler cap is properly secured, the “Check
Fuel Cap” light will turn off after a short period of driving.

If you must replace the fuel filler cap, replace it with a fuel filler
cap that is designed for your vehicle. The customer warranty may
be void for any damage to the fuel tank or fuel system if the
correct genuine Ford or Motorcraft fuel filler cap is not used.

The fuel system may be under pressure. If the fuel filler cap is
venting vapor or if you hear a hissing sound, wait until it stops

before completely removing the fuel filler cap. Otherwise, fuel may
spray out and injure you or others.

REVIEW COPY

2004 Town Car

(tow)

, Owners Guide (post-2002-fmt)

(own2002)

,

Market:

USA_English

(fus)

Maintenance and Specifications

260

Summary of Contents for Town Car 2004

















































































































































































































































































































Reviews:

No comments

Related manuals for Town Car 2004

Ignition 63-231 Quick Start preview
63-231
Brand: Ignition Pages: 1
Saab B205 Installation Instructions Manual preview
B205
Brand: Saab Pages: 10
BMW 3-series convertible Complete Vehicle Workbook preview
3-series convertible
Brand: BMW Pages: 98
REVCAMUK MON16AHD Instructions preview
MON16AHD
Brand: REVCAMUK Pages: 4
WABCO TP2205 Installation Manual preview
TP2205
Brand: WABCO Pages: 48
Hyundai Santa Fe 2006 Owner'S Manual preview
Santa Fe 2006
Brand: Hyundai Pages: 280
Thule RaceWay 991 Instructions Manual preview
RaceWay 991
Brand: Thule Pages: 12
Paser UNICOM JVC Installation Manual preview
UNICOM JVC
Brand: Paser Pages: 2
Xblitz XME PRO User Manual preview
XME PRO
Brand: Xblitz Pages: 56
POOL-LINE 110085 Assembly Instructions preview
110085
Brand: POOL-LINE Pages: 2
Safe Fleet Prime Design VBI-FT31B Assembly Instructions Manual preview
Prime Design VBI-FT31B
Brand: Safe Fleet Pages: 12
Lippert Stargazer Spirit XTR Skylight Installation Manual preview
Stargazer Spirit XTR Skylight
Brand: Lippert Pages: 8
HAKR TRIP 3 Instructions For Use Manual preview
TRIP 3
Brand: HAKR Pages: 9
Scosche HAQ02 Quick Start Manual preview
HAQ02
Brand: Scosche Pages: 8
Wallbox PLP1 Installation Manual preview
PLP1
Brand: Wallbox Pages: 21
Yakima K1043 Manual preview
K1043
Brand: Yakima Pages: 10
Yakima SUPDawg Manual preview
SUPDawg
Brand: Yakima Pages: 10
Adaptiv Mini CAM-MB6-AD User Manual preview
CAM-MB6-AD
Brand: Adaptiv Mini Pages: 4

Brands by name

Popular brands

Load more brands