Lincoln Town Car 2004 Owner'S Manual Download Page 13

Page: 13 / 304

Air suspension:

Illuminates when

the air suspension is turned OFF or
the air suspension system requires
servicing.

Washer:

Illuminates when the

windshield washer fluid is low.

Speed control:

Illuminates when

the speed control is activated. Turns
off when the speed control system
is deactivated.

O/D off:

Illuminates when the

overdrive function of the
transmission has been turned OFF
using the transmission control
switch (TCS), refer to the

Driving

chapter. If the light flashes steadily
or does not illuminate, have the
transmission serviced soon, or
damage may occur.

Door ajar:

Illuminates when any

door is open (or not fully closed).

REVIEW COPY

2004 Town Car

(tow)

, Owners Guide (post-2002-fmt)

(own2002)

Market:

USA_English

(fus)

Instrument Cluster

Summary of Contents for Town Car 2004

















































































































































































































































































































Search results

Summary of Contents for Town Car 2004

Reviews:

Related manuals for Town Car 2004

Brands by name

Popular brands

Lincoln Town Car 2004, Owner'S Manual

Search results

Summary of Contents for Town Car 2004

Reviews:

Related manuals for Town Car 2004

Brands by name

Popular brands