Lincoln Town Car 2004 Owner'S Manual Download Page 166

Page: 166 / 304

Never place your arm over the air bag module as a deploying air
bag can result in serious arm fractures or other injuries.

To properly position yourself away from the air bag:

•

Move your seat to the rear as far as you can while still reaching the
pedals comfortably.

•

Recline the seat slightly one or two degrees from the upright position.

Do not put anything on or over the air bag module. Placing
objects on or over the air bag inflation area may cause those

objects to be propelled by the air bag into your face and torso causing
serious injury.

Do not attempt to service, repair, or modify the air bag
supplemental restraint systems or its fuses. See your Ford or

Lincoln Mercury dealer.

The front passenger air bag is not designed to offer protection to
an occupant in the center front seating position.

Modifying or adding equipment to the front end of the vehicle
(including frame, bumper, front end body structure and tow

hooks) may affect the performance of the air bag system, increasing
the risk of injury. Do not modify the front end of the vehicle.

REVIEW COPY

2004 Town Car

(tow)

, Owners Guide (post-2002-fmt)

(own2002)

Market:

USA_English

(fus)

Seating and Safety Restraints

166

Summary of Contents for Town Car 2004

















































































































































































































































































































Search results

Summary of Contents for Town Car 2004

Reviews:

Related manuals for Town Car 2004

Brands by name

Popular brands

Lincoln Town Car 2004, Owner'S Manual

Search results

Summary of Contents for Town Car 2004

Reviews:

Related manuals for Town Car 2004

Brands by name

Popular brands