Owner’s Manual
Hydraulic pump 609-29232-1 Single-line with 165-l container
4.1EN-68607-G09
Subject to changes
Page 8 of 15
LINCOLN GmbH Postfach 1263 D-69183 Walldorf Tel +49 (6227) 33-0 Fax +49 (6227) 33-259
Mount the oscillating cylinder to the pump tube
1. Screw side with shorter thread of threaded rod (item 2) into
cylinder head of oscillating cylinder and tighten firmly.(sticked
in with Loctite 274)
2. Mount oscillating cylinder to upper part of pump tube.
Handscrew the 4 self-locking
hexagon nuts (item 3).
3. Firmly connect piston rods of pump tube and oscillating
cylinder with screw fitting (item 5).
4. Connect oscillating cylinder to hydraulic device and carry
out some double strokes at low speed.
5. Stop before down stroke and firmly tighten the 4 self-locking
hexagon nuts (item 3) crosswise.
