Lincoln 2009 MKS Owner'S Manual Download Page 259

Page: 259 / 331

Stopping and securing the vehicle

1. Park on a level surface, set the
parking brake and activate hazard
flashers.

2. Place gearshift lever in P (Park)
and switch engine off.

Removing the spare tire and jack

1. Lift the trunk cargo cover, and
remove the wing nut that secures
the spare tire by turning it
counterclockwise.

2. Lift and remove the spare tire
from the trunk.

3. Remove the second wing nut that
secures the jack retention bracket
by turning it counterclockwise,
remove the jack kit from the
vehicle.

4. Remove the jack and the wrench
from the felt bag. Fold down the
wrench socket to use to loosen the
lug nuts and to operate the jack.

Roadside Emergencies

259

2009 MKS

(mks)

Owners Guide

(own2002)

, 3rd Printing

USA

(fus)

Summary of Contents for 2009 MKS












































































































































































































































































































































Search results

Summary of Contents for 2009 MKS

Reviews:

Related manuals for 2009 MKS

Brands by name

Popular brands

Lincoln 2009 MKS, Owner'S Manual

Search results

Summary of Contents for 2009 MKS

Reviews:

Related manuals for 2009 MKS

Brands by name

Popular brands