Lincoln 2009 MKS Owner'S Manual Download Page 69

Page: 69 / 331

WARNING:

Adaptive cruise control is not a collision warning or

avoidance system. Additionally, adaptive cruise control will not

detect:

•

Stationary or slow moving vehicles below 6 mph (10 km/h).

•

Pedestrians or objects in the roadway.

•

Oncoming vehicles in the same lane.

WARNING:

Do not use the adaptive cruise control when

entering or leaving a highway, in heavy traffic or on roads that

are winding, slippery or unpaved.

WARNING:

Do not use in poor visibility, specifically fog, rain,

spray or snow.

Setting adaptive cruise control

Note:

It is the drivers responsibility to stay alert, drive safely and be in

control of the vehicle at all times.

The controls for using your cruise
control are located on the steering
wheel.

1. Press and release the ON control.
The message center will display
CRUISE ON RADAR READY.

2. Accelerate to the desired speed.

Driver Controls

2009 MKS

(mks)

Owners Guide

(own2002)

, 3rd Printing

USA

(fus)

Summary of Contents for 2009 MKS












































































































































































































































































































































Search results

Summary of Contents for 2009 MKS

Reviews:

Related manuals for 2009 MKS

Brands by name

Popular brands

Lincoln 2009 MKS, Owner'S Manual

Search results

Summary of Contents for 2009 MKS

Reviews:

Related manuals for 2009 MKS

Brands by name

Popular brands